Short answer: A pulverized coal burner suits a long-term stationary plant where coal is cheap and available all year; our batch plants use about 10 kg of coal per ton of mix. It needs storage, grinding or supply, feeding, fire and dust safety, and ash control, and is best decided at the order. Plants that move often or lack coal are simpler with gas, diesel or heavy oil.
Coal can cut fuel cost, but only if you have the space and discipline to run it safely.
When coal makes sense
| Condition | Coal | Gas or oil |
|---|---|---|
| Coal is cheap and available all year | Good | — |
| Plant stays on one site for years | Good | Fine |
| Plant moves often | Poor | Better |
| Gas pipeline available | — | Better (cleaner, simpler) |
| Strict dust and ash limits | Needs strong dust control | Easier |
What the system includes
- Coal storage — closed, away from ignition, kept dry.
- Grinding or pulverized supply — to the fineness the burner needs.
- Feeding and metering — a controlled flow to the burner.
- Burner and ignition — often with oil or gas for startup.
- Safety — dust control, ventilation, fire and explosion protection.
- Ash and dust handling — a baghouse sized for the extra load.
Consumption and cost
Our batch plant parameter tables list about 10 kg of coal per ton of mix under typical conditions, against 5.5–7 kg of fuel oil. Compare delivered price ÷ heating value for each fuel, then multiply by consumption — or use the cost per ton calculator.
Risks to plan for
- Dust and fire: coal dust is flammable; design and training are essential.
- Moisture: wet coal clogs grinding and feeding.
- Ash: more dust for the baghouse and more waste to dispose of.
- Maintenance: more wear parts than a gas or oil burner.
Dual fuel
A burner that can also use oil or gas gives security if coal supply stops. See the full comparison in burner fuels and reducing fuel consumption. Tell us your coal supply and site and we will say whether coal suits your plant.


