Short answer: In a parallel-flow drum the aggregate moves with the burner gas, and in a counterflow drum it moves against it. Counterflow generally uses heat more efficiently, with a lower exhaust temperature, and keeps binder away from the hot gas stream, while parallel flow is simpler and common in older drum plants. When buying, ask which design is offered and where binder and RAP are added.

Drum mix plants dry and mix in one drum, but there are two ways to arrange the flow of aggregate and hot gas. The choice affects fuel efficiency, how the binder is treated and how well the drum handles RAP.

The two designs

Parallel flow Counterflow
Aggregate direction Same as the gas Against the gas
Burner position At the aggregate feed end At the aggregate discharge end
First contact Wet aggregate meets hottest gas Wet aggregate meets cooler exhaust gas
Heat exchange Less efficient More efficient
Exhaust temperature Higher Lower
Binder addition Downstream in the drum, in the gas stream Outside the gas stream (behind the flame or in a separate zone)
Common in Older drum plants Modern drum plants; batch plant dryers

Why counterflow is more efficient

In counterflow, the hottest aggregate near the discharge meets the hottest gas near the burner, while the coldest, wettest aggregate at the feed end meets gas that has already given up much of its heat. Heat is transferred along the whole drum, and the gas leaves cooler — more of the fuel’s heat stays in the aggregate.

Binder and the gas stream

In parallel-flow drums, binder is added in the drum where hot gas still flows past. Designs that add binder and RAP away from the gas stream reduce binder aging and smoke — important for mix quality and emissions.

What to ask a supplier

  1. Is the drum counterflow or parallel flow?
  2. Where are binder, filler and RAP added relative to the flame and gas?
  3. What exhaust temperature is expected at rated output?
  4. How is the drum sized for my aggregate moisture?

For the drum plant decision itself, see when a drum plant is enough and our RMX-D drum mix plants. For the dryer basics, see drying drum and burner.