Short answer: Bitumen reaches a plant by bulk tanker, ISO tank container, flexitank or drums. Bulk is normally cheapest per ton at volume but needs heated storage and a tanker route, while drums suit small, remote sites but add labor, waste and melting equipment. Whatever the form, the plant needs heated storage that covers the gaps between deliveries, so plan the supply before the plant.

The right option depends on how much you use, how far it travels and what your site can heat and unload.

The four options

Supply How it arrives Good for Watch for
Bulk tanker Heated road tanker pumps into plant tanks Steady volumes near a refinery or depot Road access; tanker availability
ISO tank container Heated tank container by sea and road Overseas supply of full loads Container return; heating at site
Flexitank Flexible bag inside a container Moderate overseas volumes Heating before unloading; handling
Drums Steel drums, heated to melt and pump Small, remote sites Labor, melting unit, empty drums

What the site must have

  • Heated storage tanks with thermal oil or direct heating — see tank heating options.
  • Unloading point with pumps and heated lines for the form you choose.
  • Capacity to cover the interval between deliveries.
  • Safety: spill control, fire protection, trained staff.

Cost factors

  1. Delivered price per ton, not the ex-depot price.
  2. Handling labor, especially for drums.
  3. Heating energy for unloading and melting.
  4. Container return and demurrage for tank containers.
  5. Waste: empty drums or flexitank liners.

Choosing by site

Site Likely choice
Near a refinery or depot, steady use Bulk tanker
Island or port-served site, full loads ISO tank or flexitank
Very remote, small volume Drums with a melting unit

Plan this before ordering the plant: a plant with no bitumen is idle. Your tank size depends on it; see the cost per ton calculator for how bitumen weighs in production cost, and the guide on shipping an asphalt plant overseas. Tell us how bitumen reaches your site and we will size the tanks and heating.